-11%

MX-5 Miata Steering Rack Spacers NA

Original price was: €89.Current price is: €79.

SkidNation Mk1 Miata Steering Rack Spacers rise your steering rack to significantly reduces bump steer. These are a necessary modification for your slammed or lowered MX-5 NA to keep your driving pleasant and safe.

In Stock

Most customers pruchase these together:

MX-5 Suspension Alignment Locks

1 × MX-5 Suspension Alignment Locks

Lock type

Lot

Clear

In Stock

€7 – €43

You're at Global shop. For EU/UK please click here.

Steering rack spacers purpose is to correct the bump steer on lowered Mazda MIata NA (Mk1) by rising steering rack 15 mm from it’s original mounting surface.

It’s a must have mod for MX-5’s without power steering and with extended lower ball joints (with extended lower ball joints the forces required for steering are much greater).

Lowering your car changes the angle of the tie rod which causes changes in wheel toe in/out over the bumps (bump steer). Adding spacers to the steering rack corrects this angle and reduces bump steer.

Adding spacers bellow steering rack corrects this angle and reduces bump steer. We decided to go with .5” or 12.7mm thickness as some rules in US restricts height of spacers to this size.

This kit will work with NA steering rack and subframe only. Spacers for Mk2 / NB are available here.

Please note that it is absolutely necessary to perform alignment on the car after the spacers are installed! Without it will cause excessive toe out and high tyre wear on the front of your car.